Why You Should Buy an Inflatable Boat


So you want a boat, but something keeps holding you back. Maybe it’s the cost associated with owning a boat, or perhaps the time it takes to maintain one that has caused you to hesitate.

Fear not, dear reader, for there is a solution to this, and it’s owning an inflatable boat. “An inflatable?” you might ask; yes, an inflatable. There are two kinds of inflatable boats. The first kind is the type that you can find in many department stores, that are made of the same plastic that an inflatable pool toy is made, and the second is a rugged, built-to-last inflatable boat that is made of either PVC or CSM which is strong enough to have an outboard motor placed on its transom, and, with the soft hull models, can fold up so small that you can fit it inside of you vehicle or in other small storage areas.


Can you spot the differences?

The cost of owning one of these inflatable boats can be lower than $800, which is a fraction of the thousands of dollars you would have to spend on other boats. If you decide to use an outboard motor on your inflatable boat, and if it is small enough, you don’t even need a trailer! Just pack your boat and motor into your vehicle and go! Along with the buying price, the cost to maintain an inflatable is very, very low. If you keep your inflatable out of the sun and wash it when it needs cleaning, the only thing you’ll be spending money on is soap and water. Maintaining your inflatable requires little energy and time, which you can then use for enjoying yourself on the water.

After you inflate your boat, you have two options: you can either deflate it and put it away, or keep it inflated. The time to completely deflate your inflatable boat and dismantle it can be done in five minutes or less; all you have to do is open all of the air valves which you do by pushing in the pin, and remove the anodized aluminum floorboards. Then just roll up the inflatable, and store it. After deflation and disassembly, the inflatable boat can be as light at 70 pounds; one or two people can lift the boat and easily store it. One of the RibRave DurAquos Inflatable Boats length is 10 feet 6 inches when fully inflated, and can deflate to 45x25x18 inches which uses very little floor space. This capability is ideal for those who want a boat but don’t want to use a trailer for their boat. If you do decide to deflate and store it, I would suggest that you put it into a storage bag that the RibRave DurAquos inflatable boat comes with. It keeps debris off, prevents damage from abrasions, and helps to keep rodents from chewing on your boat.


The DurAquos Inflatable Boat fits in virtually every vehicle unless you have one of those tiny European cars!

Keeping your boat inflated after using it works, too. You can simply tie your inflatable to the dock cleat and leave it in the water, or attach it to your larger boat and tow it. Say you want to keep your inflatable boat inflated, but out of the water. It is perfectly viable to do so, however, you should use a boat cover. Covering your boat will protect it from UV rays which cause oxidation of the boat material, making it degrade faster and reducing its lifetime. What’s great about keeping your boat inflated is that the next time you decide to go back out on the water with it, all you have to do is take a minute to add a little air into the tubes if need be.

It’s a lot of fun when you pair up your inflatable with an outboard motor. The boat is so light that it requires little power to get it into planing mode.You would be surprised at how well an inflatable boat performs, especially the ones with a Deep-V keel. It’s a very smooth and dry ride. Inflatables are perfect to simply get around in, but it’s capable of moving fast—and controlled—if speed is your thing. It’s quite thrilling! I was in Jacksonville, Florida a little while back and I was riding the RibRave DurAquos 10ft 6in Inflatable Boat using a 6HP outboard motor on the intercoastal; though the 10ft 6in model is capable of handling up to a 15HP motor, the 6HP did the job. As I revved up the throttle, I could feel the bow descending ever so slightly at first, and as I gained a bit more speed, the bow was almost parallel with the surface of the water, and I was planing. “Pretty cool”, I thought in that moment, because not fifteen minutes before then, the boat that I was now zooming down the waterway with was folded inside of my car. I slowed down as I approached a fisherman sitting in his kayak, and he was surprised to know that the inflatable boat had a soft hull. When I was finished that day, I rode back down to the slip, packed it up, and was about my way.


The DurAquos Inflatable Boat easily planes on water with a small outboard motor.

Owning an inflatable boat is low cost and low maintenance, and you can get a ton of enjoyment out of it. So what are you waiting for? Get a RibRave DurAquos Inflatable Boat today and start having fun!

How to Set Up an Inflatable Boat

Here is our step by step video tutorial about how to set up an inflatable dinghy!  The boat used in the video is the RibRave DurAquos 10′ 6″, made of 1100 denier count  PVC, and is 0.9mm thick. I hope that this video is helpful to you, and if you have any questions, feel free to comment or contact us.

Happy Boating,


The Mobility of a RibRave DurAquos Inflatable Boat

Have you ever been on a boat that doesn’t track well, and you spend more time trying to get your boat going in a straight line rather than drifting left and right? How about a boat that just doesn’t plane at all, even though you have disbursed weight properly throughout your vessel and you know that the outboard motor you have should be able to get your boat planing?

The mobility of the The RibRave DurAquos Inflatable Boat is great, with or without an outboard motor on it. The RibRave DurAquos inflatable boat is also very easy to get into the water, especially since one does not require the use of a trailer to back the boat down into the water, like a traditional fiberglass bottom boat, which gives you more time doing what you love.  In any condition of water, the RibRave DurAquos is perfect for cruising on; whether you have choppy waves or the water is as smooth as glass, your DurAquos will conquer those waters time and time again. But about its mobility, the two things that make it so great for getting around it its Deep V keel, and the long pontoons—the tubes that extend past the transom—which allows one to achieve planing mode quicker than normal.

The RibRave DurAquos 10′ 6″ In Planing Mode Using a 6 Horsepower Outboard Motor

The Deep V keel adds a good amount of tracking to the boat, allowing one to precisely maneuver the boat while maintaining complete control, even at increased speeds. Let’s use a hypothetical situation and say that one didn’t have a Deep V keel, but instead used a flat bottom boat; the boat would ‘drift’, or sway right or left, while moving forward, thus decrease in performance depending in what application you are using your boat for.

The extra-long pontoons on the The RibRave DurAquos Inflatable Boat serve the unique purpose of getting the boat to plane at low speeds. When the boat is in the water, and one throttles the outboard, the bow of the boat lifts out of the water until it gains enough speed, at which point the bow slightly lowers itself back down and the boat goes into planing mode, meaning that the boat is operating on top of the water, rather than plowing through it. The pontoons function is to decrease the time—or the required speed—it takes to achieve planing mode by preventing the bow from lifting far from the water. If you have an additional passenger or equipment on your boat, it help to have them towards the bow of the boat if you are attempting to have it plane.

The RibRave DurAquos Inflatable Boat offers plenty more than just increased mobility and peak performance. You can read more about the RibRave DurAquos by visiting our website at ribrave.com

Happy boating!